Programmer module Z Automotive Tazer RAM

• Changing vehicle settings permanently - changes made to the vehicle, will work even when the programmer is disconnected
• Changing vehicle settings live - changes are made live in real time and only work if the programmer is connected to the vehicle
• "Non-Menu" Live Functions are operations the Tazer Ram performs live, only while it is physically connected, and are not located in a menu. They are activated automatically or with button presses.

List of vehicle settings (engine off):

• Light show - 6 pre-programmed and 3 custom light shows that flash all exterior lights - ideal for car shows/first responders/off-road visibility - controlled from remote control (key fob) or steering wheel buttons - can be turned on in motion for use in parades or off-road
• Change tire size
• Display DTCs - display Diagnostic Trouble Codes to see why the Check Engine light may be on
• Clear CELs - reset check engine light and DTC codes
• Disable TPMS warnings (Tire Pressure Monitoring System)
• Speedometer calibration for tires size other than factory
• Enable the addition of factory fog lights
• Enable the addition of factory backup camera
• Enable aux video/audio signal for front camera and/or external video source (8.4" UConnect only, 2018 and newer models can only enable one CargoCam input)
• Enable/disable SiriusXM TravelLink
• Enable/disable daytime running lights / select which lights to use
• Enable/disable factory fogs
• Disable DRL Dropout (DRL shut-off while turn signal is on)
• Disable Fog Light Dropout (fog light shut-off while high beams are on)
• Enable/disable EasyExit (2015+)
• Enable/disable Aux Buttons
• Enable/disable power folding mirrors
• Quick "Unmarry" function returns to stock

List of Live Functions (engine on):

• Dark Mode - turn off all exterior and interior lightning while parked with engine running
• Enable navigation entry in-motion
• Change engine power mode (experimental, 2015+ models)
• Change transmission mode (experimental, 2015+ models)
• Activate Light Show
• AutoFold - automatically extend/retract power folding mirrors when engine is turned on/off
• Cycle cameras/video inputs
• Start-up options for AutoPark kill, TC and TMPS warning delete
• Can emulate 4LOW when in 2WD and 4HI
• Clear CELs - reset check engine light, useful after installing mods that set the light
• 0-30 and 0-60 timers displays on EVIC display

"Non-Menu" Live Functions:

• Light Show (shortcut)
• Open windows using keyfob (experimental, may not work with all bypass types)
• Line Lock - lock front brakes for easy burnout
• Disable ESP/TC by holding ESP button
• Cycle camera outputs (shortcut)
• Cooldown Mode - turn on engine fans, even when engine is off
• Winch Mode - raise idle RPM to selected value between 1250 and 2000 RPM
• Partial Reboot

Notes:

• Can be used with one car only (lock)
• 2018 and newer models require additional OBDII T-Harness Bypass, available in our store (ZABSR18)
• Not compatible with RAM 1500 DT and TRX, see Tazer DT (ZATDTR19) for those models, also available in our shop