Suspension kit Rough Country Lift 6"

• Proudly made in the USA
• Unmatched ground clearance due to high clearance crossmember design
• 100% precision laser cut materials used in latest computer aided design process
• Levels the front with the rear of the vehicle
• Will work with factory 18-inch or larger wheels
• Requires no modification to the stock differential mounts, drivetrain or exhaust
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks

Shock specs:

• 10-Stage variable valving
• High pressure nitrogen charged
• 35mm piston
• Chromed hardened 18mm piston rod
• 54mm Shock body to dissipate heat faster
• 36kN Tensile strength
• Spring loaded piston rod seal
• Military spec. fluid rated To –40° C
• Rubber bushings for better absorption
• Metallic silver paint

In the box:

• Front lifted knuckles
• Front strut spacers
• Front crossmember
• Front steering stops
• Front brake line brackets
• Front differential drop brackets
• Front bump stop brackets
• Front sway bar brackets
• Front lower skid plate
• Rear crossmember
• Rear fabricated lift blocks
• Rear U-bolts
• Rear brake line brackets
• Strut spacers
• (2) Shock N3 Premium
• Hardware

Notes:

• Fits both to 2WD and 4WD models
• Does NOT fit TRD Pro Series models
• Does NOT fit Rock Warrior models
• Does NOT fit XSP-X models.
• Minor cutting and drilling is required
• Requires 18" or larger wheels
• Stock 18" or larger wheels can be used but can accommodate tires no wider than 11,5"
• In some cases minor trimming may be needed to clear 35-inch tires
• On vehicles equipped with a two piece driveshaft there is the potential for take off vibration, this can be corrected with Carrier bearing relocation kit RC1776BOX1 (sold separately)