Programmer module Z Automotive Tazer DT

• Changing vehicle settings permanently - changes made to the vehicle permanently, will work even when the programmer is disconnected
• Changing vehicle settings live - changes are made live in real time and only work if the programmer is connected to the vehicle
• "Non-Menu" Live Functions are operations the Tazer Ram performs live, only while it is physically connected, and are not located in a menu. They are activated automatically or with button presses.

List of vehicle settings (engine off):

• read and clear DTCs system-wide or nonspecific modules
• change tire size
• change gear ratio
• change Transfer Case LOW ratio
• enable/disable TPMS system
• set TPMS pressure warning limit, front and rear, between 25psi and 85psi
• enable/disable backup camera
• enable/disable Cargo Camera input (8.4" and 12" NAV UConnect only)
• enable/disable CD (wired audio) input
• enable/disable TravelLink/XM traffic and weather
• change daytime running lights (DRL) region (CA/USA)
• change DRL location
• enable/disable DRL Dropout function
• enable/disable factory fog lights
• enable/disable Fog Light Dropout (when fogs shut off while high beams are on)
• enable/disable one-touch lane change
• enable/disable factory halo lights (including BCM output for adding halos)
• configure vehicle for LED 3rd brake light
• change headlight type (Std/LED)
• change fog light type (Std/LED)
• change tail light type (Std/LED)/delete sensor circuit for running aftermarket lights
• change front turn signal type (std/LED)/delete sensor circuit for running aftermarket lights
• enable/disable Trailer Tow setting
• activate MOPAR Power Folding Mirrors
• activate mirror turn signals
• activate tow mirror lights
• activate approach mirror lights
• enable/disable Aux Buttons
• enable/disable Blind Spot Detection (if the hardware is added or removed)
• enable MOPAR power side step
• disable front axle disconnect module for axle swaps
• disable rear locker for axle swaps
• disable electronic steering pump for hydraulic steering conversions
• change cluster splash screen
• enable/disable PANIC button on remote
• one-touch return-to-stock - quick "Unmarry" function returns to stock.

List of live functions (engine on):

• activate Light Show
• hold brakes at a red light
• enable navigation entry in-motion
• TurnCAM - activate backup camera when turn signals are used (5", 7", 8.4" and 12.1" UConnect) (excluding 2022 temporarily)
• Kill3Honk - disable three honks that sound when leaving running vehicle with keys
• ParkCam - activate SurroundView and front camera when front parking sensors are triggered
• automatically fold mirrors in/out on startup/shutdown
• override factory DRLs with amber DRL and turn on factory marker lights, including TRX hood lights in multiple modes (day, night or both)
• flash third brake light when braking
• customize third brake light flash pattern
• define Winch Mode RPM
• flash lights to indicate tire pressure while airing up/down
• Dark Mode - turn off all exterior lighting and dash/radio/shifter lights while parked with the engine running
• activate backup camera
• Force RWD (TRX only)
• activate 0-30 or 0-60 timer
• display firmware version

List of "Non-Menu" Live Functions:
(not in a menu - automatic or activated with button inputs only)

• AutoStopStart Disable - Tazer DT will automatically remember the last state of the auto stop/start system and set it for you the next time you start the vehicle
• AutoTracKill - Tazer DT will automatically remember the last state of the traction control system and set it for you the next time you start the vehicle
• Drive Mode Memory (TRX only) - Tazer DT will automatically remember drive mode and set it the next time you start the vehicle
• disconnect sway bar in 2WD up to 30mph or at any speed if mapped to a button
• Axle Locker Control - engage lockers in 2WD and 4Hi on demand.
• Cooldown Mode - turn on engine fans on-demand
• Winch Mode - raise idle RPM to user-selected value between 1300 and 2000
• Line Lock - lock the front brakes for an easy burnout
• Rock Crawl - lock all four brakes with a steering wheel button combo to hold the vehicle still, especially helpful when off-road
• TC Kill - turn off traction control, stability control and ABS
• show backup camera (shortcut)
• Turn Assist - lock the inside back tire for sharper turns (button remap function only)
• Remap buttons to:
  - Any of the 8 light shows
  - Backup cameras
  - TC Kill
  - Line Lock
  - Rock Crawl
  - Winch Mode
  - Cooldown
  - Front/Rear/Front+Rear Lockers
  - SwayKill
  - Dark Mode
  - Turn Assist
  - Force RWD
• Partial Reboot

Notes:

• Can be used with only one vehicle (lock)
• Compatible with only 1500 DT (2018-2024) and TRX versions (2018-2024)
• Does not fit Classic models
• 2020 and newer vehicles have tire size limit 35", after which ParkSense function will be disabled. There is no way to bypass it
• Updates are completely free